NetMAX BLD475

Free BSD NetMAX BLD475 provides software RAID Level 0 (striping), as well as software RAID Level 1 (mirroring). The DPT RAID IV controllers are supported, which provide hardware controlled RAID 0, 1, and 5 (striping with rotating parity). In addition, the DPT RAID IV controllers support RAID 10 and RAID 50.

The DPT RAID V controllers are not supported.

Adaptec RAID controllers are not supported (i.e. the Adaptec 131 or 7880). However, they are supported as normal SCSI controllers.

NetMAX RH52Pv2.0

The Linux version of NetMAX RH52Pv2.0 supports software RAID levels 0, 1, and 5. Please see our Hardware RAID article for information on hardware RAID.

NetMAX L2.2Pv2.x (or later)

The newer versions of NetMAX still support software RAID levels 0, 1, and 5, however, you can not include the system drive (the drive the OS is installed on) in the RAID.

IMPORTANT NOTE: CONFIGURING ANY TYPE OF RAID ON A NETMAX SYSTEM REQUIRES MORE THAN ONE HARD DISK DRIVE.
address-suppressed