1. Install setserial.

You can install setserial from Home|Services|Package Management

Click on ADD, select the category Applications/System, check the box next to setserial, and click on CONTINUE.

2. Configure Modem - (configure per manufacturers instructions see below)

3. Setup Modem in NetMAX Interface

From Home|Network|Interfaces click on the pencil next to ttySx (where x is the serial port that is detected with the modem)

Click on the SELECT button next to Current Configuration, check the box next to the "Generic 115200", then click on the pencil next to this modem and go to the Intialization Tab.

Click on the pencil next to the initialization sequence and edit it to read ATZ

Click on STORE, then SELECT, then STORE, then COMMIT, and commit your changes.

To our knowledge, this is the only PCI modem that Linux supports.
address-suppressed