(Answer) (Category) NetMAXFAQ : (Category) NetMAX VPN Server Suite (Virtual Private Networking) :
How do I configure VPN Client Communications?
Applies to: NetMAX VPN Server Suite version 3.1 - 4.0x
address-suppressed
Please refer to the NetMAX VPN Server Suite users manual, Example Configurations section, for configuration of SafeNet SoftRemote or Windows 2000 configuration.

To determine if a client if capable of communicating with the NetMAX VPN Suite, it must have the following characteristics:
  • ISAKMP (Phase 1) communication on UDPO port 500
  • ISAKMP main mode configuration (for static IP connections)
  • IPSEC (Phase 2) quick mode configuration
  • Preshard secrets (passphrase)
  • 3DES encryption
  • SHA-1 or MD5 authentication
  • Key exchange using Diffie-Hellman Group 2, 1024 bits
  • Key lifetime of 540 seconds
  • IPSEC key lifetime of 300 seconds
  • ISAKMP aggressive mode configuration (for Road Warrior connections)

If the client software has these characteristics, refer to the documentation included with the product on configuration.
address-suppressed
Previous: (Answer) I am planning a site-to-site tunnel between two NetMAX VPN servers. What do I need to know?
Next: (Answer) What Ethernet cards are compatible with the VPN Client?
This document is: http://www.netmax.org/cgi-bin/fom.cgi?file=337
[Search] [Appearance]
This is a Faq-O-Matic 2.721.
This FAQ administered by ...Cybernet Systems Corp.